For Network Mode, SSID, and Wireless Channel, set the same options as your primary router. If you want to connect wired devices (e.g., your TV or game console) on the old router and have it connected wirelessly to your modem or other router, then choose "Client Bridge" in the Wireless Mode drop-down.Here's where the instructions differ, depending on what you want to do: Open a web browser and go to 192.168.1.1 to get to the DD-WRT control panel (If your computer doen't use DHCP to get its IP address automatically, you'll have to set the IP address to the same subnet-e.g., 192.168.1.5). Install DD-WRTĭo a hard reset on your router (check the manual or search for " hardware reset," then connect your computer to the router's LAN port with an Ethernet cable.
If your router can't install DD-WRT, you can always buy a used one, such as the popular Linksys WRT54G for pretty cheap.
Head to DD-WRT to find out if your router model is supported and download the latest release. There are a few different scenarios here, but for all of them, you'll need to install the Linux-based DD-WRT to replace the old router's default firmware-and give it not only more options but also enhance its performance. This means that even devices that can't reach your main router can get connected through the old router anywhere you put it. By installing the free DD-WRT firmware on the old router, you can turn it into a wireless bridge or repeater. If you own devices with wired-only (Ethernet) connections and your router or modem is too far away or your wireless network doesn't cover enough area in your home, an old router can solve your problems.
0 kommentar(er)
